Commit graph

147 commits

Author SHA1 Message Date
lat9nq
63d23835ef
configuration: implement per-game configurations (#4098)
* Switch game settings to use a pointer

In order to add full per-game settings, we need to be able to tell yuzu to switch
to using either the global or game configuration. Using a pointer makes it easier
to switch.

* configuration: add new UI without changing existing funcitonality

The new UI also adds General, System, Graphics, Advanced Graphics,
and Audio tabs, but as yet they do nothing. This commit keeps yuzu
to the same functionality as originally branched.

* configuration: Rename files

These weren't included in the last commit. Now they are.

* configuration: setup global configuration checkbox

Global config checkbox now enables/disables the appropriate tabs in the game
properties dialog. The use global configuration setting is now saved to the
config, defaulting to true. This also addresses some changes requested in the PR.

* configuration: swap to per-game config memory for properties dialog

Does not set memory going in-game. Swaps to game values when opening the
properties dialog, then swaps back when closing it. Uses a `memcpy` to swap.
Also implements saving config files, limited to certain groups of configurations
so as to not risk setting unsafe configurations.

* configuration: change config interfaces to use config-specific pointers

When a game is booted, we need to be able to open the configuration dialogs
without changing the settings pointer in the game's emualtion. A new pointer
specific to just the configuration dialogs can be used to separate changes
to just those config dialogs without affecting the emulation.

* configuration: boot a game using per-game settings

Swaps values where needed to boot a game.

* configuration: user correct config during emulation

Creates a new pointer specifically for modifying the configuration while
emulation is in progress. Both the regular configuration dialog and the game
properties dialog now use the pointer Settings::config_values to focus edits to
the correct struct.

* settings: split Settings::values into two different structs

By splitting the settings into two mutually exclusive structs, it becomes easier,
as a developer, to determine how to use the Settings structs after per-game
configurations is merged. Other benefits include only duplicating the required
settings in memory.

* settings: move use_docked_mode to Controls group

`use_docked_mode` is set in the input settings and cannot be accessed from the
system settings. Grouping it with system settings causes it to be saved with
per-game settings, which may make transferring configs more difficult later on,
especially since docked mode cannot be set from within the game properties
dialog.

* configuration: Fix the other yuzu executables and a regression

In main.cpp, we have to get the title ID before the ROM is loaded, else the
renderer will reflect only the global settings and now the user's game specific
settings.

* settings: use a template to duplicate memory for each setting

Replaces the type of each variable in the Settings::Values struct with a new
class that allows basic data reading and writing. The new struct
Settings::Setting duplicates the data in memory and can manage global overrides
per each setting.

* configuration: correct add-ons config and swap settings when apropriate

Any add-ons interaction happens directly through the global values struct.
Swapping bewteen structs now also includes copying the necessary global configs
that cannot be changed nor saved in per-game settings. General and System config
menus now update based on whether it is viewing the global or per-game settings.

* settings: restore old values struct

No longer needed with the Settings::Setting class template.

* configuration: implement hierarchical game properties dialog

This sets the apropriate global or local data in each setting.

* clang format

* clang format take 2

can the docker container save this?

* address comments and style issues

* config: read and write settings with global awareness

Adds new functions to read and write settings while keeping the global state in
focus. Files now generated per-game are much smaller since often they only need
address the global state.

* settings: restore global state when necessary

Upon closing a game or the game properties dialog, we need to restore all global
settings to the original global state so that we can properly open the
configuration dialog or boot a different game.

* configuration: guard setting values incorrectly

This disables setting values while a game is running if the setting is
overwritten by a per game setting.

* config: don't write local settings in the global config

Simple guards to prevent writing the wrong settings in the wrong files.

* configuration: add comments, assume less, and clang format

No longer assumes that a disabled UI element means the global state is turned
off, instead opting to directly answer that question. Still however assumes a
game is running if it is in that state.

* configuration: fix a logic error

Should not be negated

* restore settings' global state regardless of accept/cancel

Fixes loading a properties dialog and causing the global config dialog to show
local settings.

* fix more logic errors

Fixed the frame limit would set the global setting from the game properties
dialog. Also strengthened the Settings::Setting member variables and simplified
the logic in config reading (ReadSettingGlobal).

* fix another logic error

In my efforts to guard RestoreGlobalState, I accidentally negated the IsPowered
condition.

* configure_audio: set toggle_stretched_audio to tristate

* fixed custom rtc and rng seed overwriting the global value

* clang format

* rebased

* clang format take 4

* address my own review

Basically revert unintended changes

* settings: literal instead of casting

"No need to cast, use 1U instead"
Thanks, Morph!

Co-authored-by: Morph <39850852+Morph1984@users.noreply.github.com>

* Revert "settings: literal instead of casting
"

This reverts commit 95e992a87c898f3e882ffdb415bb0ef9f80f613f.

* main: fix status buttons reporting wrong settings after stop emulation

* settings: Log UseDockedMode in the Controls group

This should have happened when use_docked_mode was moved over to the controls group
internally. This just reflects this in the log.

* main: load settings if the file has a title id

In other words, don't exit if the loader has trouble getting a title id.

* use a zero

* settings: initalize resolution factor with constructor instead of casting

* Revert "settings: initalize resolution factor with constructor instead of casting"

This reverts commit 54c35ecb46a29953842614620f9b7de1aa9d5dc8.

* configure_graphics: guard device selector when Vulkan is global

Prevents the user from editing the device selector if Vulkan is the global
renderer backend. Also resets the vulkan_device variable when the users
switches back-and-forth between global and Vulkan.

* address reviewer concerns

Changes function variables to const wherever they don't need to be changed. Sets Settings::Setting to final as it should not be inherited from. Sets ConfigurationShared::use_global_text to static.

Co-Authored-By: VolcaEM <volcaem@users.noreply.github.com>

* main: load per-game settings after LoadROM

This prevents `Restart Emulation` from restoring the global settings *after* the per-game settings were applied. Thanks to BSoDGamingYT for finding this bug.

* Revert "main: load per-game settings after LoadROM"

This reverts commit 9d0d48c52d2dcf3bfb1806cc8fa7d5a271a8a804.

* main: only restore global settings when necessary

Loading the per-game settings cannot happen after the ROM is loaded, so we have to specify when to restore the global state. Again thanks to BSoD for finding the bug.

* configuration_shared: address reviewer concerns except operator overrides

Dropping operator override usage in next commit.

Co-Authored-By: LC <lioncash@users.noreply.github.com>

* settings: Drop operator overrides from Setting template

Requires using GetValue and SetValue explicitly. Also reverts a change that broke title ID formatting in the game properties dialog.

* complete rebase

* configuration_shared: translate "Use global configuration"

Uses ConfigurePerGame to do so, since its usage, at least as of now, corresponds with ConfigurationShared.

* configure_per_game: address reviewer concern

As far as I understand, it prevents the program from unnecessarily copying strings.

Co-Authored-By: LC <lioncash@users.noreply.github.com>

Co-authored-by: Morph <39850852+Morph1984@users.noreply.github.com>
Co-authored-by: VolcaEM <volcaem@users.noreply.github.com>
Co-authored-by: LC <lioncash@users.noreply.github.com>
2020-07-09 22:42:09 -04:00
Fernando Sahmkow
de5b521c09 Process: Protect TLS region and Modules. 2020-06-27 11:35:21 -04:00
Fernando Sahmkow
d4ebb510a0 SVC: Correct WaitSynchronization, WaitProcessWideKey, SignalProcessWideKey. 2020-06-27 11:35:17 -04:00
Fernando Sahmkow
3b5b950c89 SVC: Correct SignalEvent, ClearEvent, ResetSignal, WaitSynchronization, CancelSynchronization, ArbitrateLock 2020-06-27 11:35:13 -04:00
Fernando Sahmkow
e31425df38 General: Recover Prometheus project from harddrive failure
This commit: Implements CPU Interrupts, Replaces Cycle Timing for Host 
Timing, Reworks the Kernel's Scheduler, Introduce Idle State and 
Suspended State, Recreates the bootmanager, Initializes Multicore 
system.
2020-06-27 11:35:06 -04:00
David Marcec
74ff1db758 kernel: Account for system resource size for memory usage
GetTotalPhysicalMemoryAvailableWithoutSystemResource & GetTotalPhysicalMemoryUsedWithoutSystemResource seem to subtract the resource size from the usage.
2020-06-10 14:49:00 +10:00
bunnei
108564df57 kernel: process: Updates for new VMM. 2020-04-17 00:59:33 -04:00
bunnei
4caff51710 core: memory: Move to Core::Memory namespace.
- helpful to disambiguate Kernel::Memory namespace.
2020-04-17 00:59:28 -04:00
bunnei
f2676efe23 process: SetupMainThread: Zero out argument on process start. 2020-04-17 00:11:50 -04:00
bunnei
c083ea7d78 core: Implement separate A32/A64 ARM interfaces. 2020-03-02 21:51:57 -05:00
Fernando Sahmkow
d23d504d77 Kernel: Refactor synchronization to better match RE 2020-02-11 18:47:31 -04:00
Fernando Sahmkow
c5aefe42aa Kernel: Change WaitObject to Synchronization object. In order to better reflect RE. 2020-02-11 10:46:25 -04:00
Markus Wick
c76ffa5019 core/kernel: Fix GetTotalPhysicalMemoryUsed.
module._memory was already moved over to a new shared_ptr.
So code_memory_size was not increased at all.

This lowers the heap space and so saves a bit of memory, usually between 50 to 100 MB.

This fixes a regression of c0a01f3adc
2020-01-11 14:04:44 +01:00
bunnei
9046d4a548
kernel: Replace usage of boost::intrusive_ptr with std::shared_ptr for kernel objects. (#3154)
* kernel: Replace usage of boost::intrusive_ptr with std::shared_ptr for kernel objects.

- See https://github.com/citra-emu/citra/pull/4710 for details.
2019-11-24 20:15:51 -05:00
Fernando Sahmkow
46bb609981 Kernel: Optimize condition variable threads management. 2019-11-21 11:13:29 -04:00
Fernando Sahmkow
2d16507f9f Kernel: Correct behavior of Condition Variables to be more similar to real hardware.
This commit ensures cond var threads act exactly as they do in the real
console. The original implementation uses an RBTree and the behavior of
cond var threads is that at the same priority level they act like a
FIFO.
2019-11-21 10:46:55 -04:00
Fernando Sahmkow
b8b7ebcece Correct compiling errors and addapt to the new interface. 2019-10-15 11:55:09 -04:00
Fernando Sahmkow
9bede4eeed VM_Manager: Align allocated memory to 256bytes
This commit ensures that all backing memory allocated for the Guest CPU
is aligned to 256 bytes. This due to how gpu memory works and the heavy
constraints it has in the alignment of physical memory.
2019-07-19 10:06:08 -04:00
bunnei
5d369112d9
Merge pull request #2687 from lioncash/tls-process
kernel/process: Allocate the process' TLS region during initialization
2019-07-18 13:53:04 -04:00
Michael Scire
b901cd584e clang-format fixes 2019-07-07 12:08:29 -07:00
Michael Scire
1689784c19 address review commentary 2019-07-07 11:48:11 -07:00
Michael Scire
13a8fde3ad Implement MapPhysicalMemory/UnmapPhysicalMemory
This implements svcMapPhysicalMemory/svcUnmapPhysicalMemory for Yuzu,
which can be used to map memory at a desired address by games since
3.0.0.

It also properly parses SystemResourceSize from NPDM, and makes
information available via svcGetInfo.

This is needed for games like Super Smash Bros. and Diablo 3 -- this
PR's implementation does not run into the "ASCII reads" issue mentioned
in the comments of #2626, which was caused by the following bugs in
Yuzu's memory management that this PR also addresses:
* Yuzu's memory coalescing does not properly merge blocks. This results
  in a polluted address space/svcQueryMemory results that would be
  impossible to replicate on hardware, which can lead to game code making
  the wrong assumptions about memory layout.
  * This implements better merging for AllocatedMemoryBlocks.
* Yuzu's implementation of svcMirrorMemory unprotected the entire
  virtual memory range containing the range being mirrored. This could
  lead to games attempting to map data at that unprotected
  range/attempting to access that range after yuzu improperly unmapped
  it.
  * This PR fixes it by simply calling ReprotectRange instead of
    Reprotect.
2019-07-07 11:45:53 -07:00
Lioncash
56c7912159 kernel/process: Allocate the process' TLS region during initialization
Prior to execution within a process beginning, the process establishes
its own TLS region for uses (as far as I can tell) related to exception
handling.

Now that TLS creation was decoupled from threads themselves, we can add
this behavior to our Process class. This is also good, as it allows us
to remove a stub within svcGetInfo, namely querying the address of that
region.
2019-07-07 14:08:28 -04:00
Lioncash
eb6f55d880 kernel/process: Move main thread stack allocation to its own function
Keeps this particular set of behavior isolated to its own function.
2019-07-07 14:08:25 -04:00
Lioncash
abdce723eb kernel/process: Decouple TLS handling from threads
Extracts out all of the thread local storage management from thread
instances themselves and makes the owning process handle the management
of the memory. This brings the memory management slightly more in line
with how the kernel handles these allocations.

Furthermore, this also makes the TLS page management a little more
readable compared to the lingering implementation that was carried over
from Citra.
2019-07-03 20:31:40 -04:00
Zach Hilman
fc0bf91a96 kernel: Differentiate kernel and user processes when picking ID
This allows kernel internal type processes to be assigned IDs in the KIP range while userland processes are assigned in the user range.
2019-06-10 00:28:33 -04:00
Zach Hilman
364932df3a
Merge pull request #2571 from lioncash/ref
kernel/process: Make Create()'s name parameter be taken by value
2019-06-09 20:43:57 -04:00
Lioncash
fea6568955 kernel/process: Make Create()'s name parameter be taken by value
Makes the interface more flexible in terms of how Create() may be
called, while still allowing the parameter itself to be moved into.
2019-06-09 18:47:37 -04:00
Lioncash
3f87664d8f kernel/svc: Implement TotalMemoryUsedWithoutMmHeap/TotalMemoryAvailableWithoutMmHeap
Given we don't currently implement the personal heap yet, the existing
memory querying functions are essentially doing what the memory querying
types introduced in 6.0.0 do.

So, we can build the necessary machinery over the top of those and just
use them as part of info types.
2019-06-09 18:22:30 -04:00
bunnei
2be32eb3d2
Merge pull request #2412 from lioncash/system
kernel/vm_manager: Remove usages of global system accessors
2019-04-28 22:27:14 -04:00
bunnei
78574e7a47
Merge pull request #2416 from lioncash/wait
kernel/svc: Clean up wait synchronization related functionality
2019-04-24 22:56:08 -04:00
bunnei
40dc893c37
Merge pull request #2374 from lioncash/pagetable
core: Reorganize boot order
2019-04-19 19:09:20 -04:00
Lioncash
c268ffd831 kernel/thread: Unify wait synchronization types
This is a holdover from Citra, where the 3DS has both
WaitSynchronization1 and WaitSynchronizationN. The switch only has one
form of wait synchronizing (literally WaitSynchonization). This allows
us to throw out code that doesn't apply at all to the Switch kernel.

Because of this unnecessary dichotomy within the wait synchronization
utilities, we were also neglecting to properly handle waiting on
multiple objects.

While we're at it, we can also scrub out any lingering references to
WaitSynchronization1/WaitSynchronizationN in comments, and change them
to WaitSynchronization (or remove them if the mention no longer
applies).
2019-04-17 09:30:56 -04:00
Lioncash
b6a87b422e kernel/vm_manager: Remove usages of global system accessors
Makes the dependency on the system instance explicit within VMManager's
interface.
2019-04-16 20:02:50 -04:00
Lioncash
09caf8a756 kernel/thread: Remove unused guest_handle member variable
This member variable is entirely unused. It was only set but never
actually utilized. Given that, we can remove it to get rid of noise in
the thread interface.
2019-04-14 06:06:06 -04:00
Lioncash
612e1388df core/core: Move process execution start to System's Load()
This gives us significantly more control over where in the
initialization process we start execution of the main process.

Previously we were running the main process before the CPU or GPU
threads were initialized (not good). This amends execution to start
after all of our threads are properly set up.
2019-04-11 22:11:41 -04:00
Lioncash
32a6ceb4e5 core/process: Remove unideal page table setting from LoadFromMetadata()
Initially required due to the split codepath with how the initial main
process instance was initialized. We used to initialize the process
like:

Init() {
    main_process = Process::Create(...);
    kernel.MakeCurrentProcess(main_process.get());
}

Load() {
    const auto load_result = loader.Load(*kernel.GetCurrentProcess());
    if (load_result != Loader::ResultStatus::Success) {
        // Handle error here.
    }
    ...
}

which presented a problem.

Setting a created process as the main process would set the page table
for that process as the main page table. This is fine... until we get to
the part that the page table can have its size changed in the Load()
function via NPDM metadata, which can dictate either a 32-bit, 36-bit,
or 39-bit usable address space.

Now that we have full control over the process' creation in load, we can
simply set the initial process as the main process after all the loading
is done, reflecting the potential page table changes without any
special-casing behavior.

We can also remove the cache flushing within LoadModule(), as execution
wouldn't have even begun yet during all usages of this function, now
that we have the initialization order cleaned up.
2019-04-11 22:11:41 -04:00
Lioncash
f2331a804a core/cpu_core_manager: Create threads separately from initialization.
Our initialization process is a little wonky than one would expect when
it comes to code flow. We initialize the CPU last, as opposed to
hardware, where the CPU obviously needs to be first, otherwise nothing
else would work, and we have code that adds checks to get around this.

For example, in the page table setting code, we check to see if the
system is turned on before we even notify the CPU instances of a page
table switch. This results in dead code (at the moment), because the
only time a page table switch will occur is when the system is *not*
running, preventing the emulated CPU instances from being notified of a
page table switch in a convenient manner (technically the code path
could be taken, but we don't emulate the process creation svc handlers
yet).

This moves the threads creation into its own member function of the core
manager and restores a little order (and predictability) to our
initialization process.

Previously, in the multi-threaded cases, we'd kick off several threads
before even the main kernel process was created and ready to execute (gross!).
Now the initialization process is like so:

Initialization:
  1. Timers

  2. CPU

  3. Kernel

  4. Filesystem stuff (kind of gross, but can be amended trivially)

  5. Applet stuff (ditto in terms of being kind of gross)

  6. Main process (will be moved into the loading step in a following
                   change)

  7. Telemetry (this should be initialized last in the future).

  8. Services (4 and 5 should ideally be alongside this).

  9. GDB (gross. Uses namespace scope state. Needs to be refactored into a
          class or booted altogether).

  10. Renderer

  11. GPU (will also have its threads created in a separate step in a
           following change).

Which... isn't *ideal* per-se, however getting rid of the wonky
intertwining of CPU state initialization out of this mix gets rid of
most of the footguns when it comes to our initialization process.
2019-04-11 22:11:40 -04:00
Lioncash
2abf979c35 kernel/process: Set page table when page table resizes occur.
We need to ensure dynarmic gets a valid pointer if the page table is
resized (the relevant pointers would be invalidated in this scenario).

In this scenario, the page table can be resized depending on what kind
of address space is specified within the NPDM metadata (if it's
present).
2019-04-09 13:00:56 -04:00
Lioncash
e779686a76 kernel: Handle page table switching within MakeCurrentProcess()
Centralizes the page table switching to one spot, rather than making
calling code deal with it everywhere.
2019-04-07 01:12:54 -04:00
bunnei
74a4a50470
Merge pull request #2314 from lioncash/const
kernel/thread: Minor interface cleanup
2019-04-03 11:46:17 -04:00
Lioncash
28719ee3b4 kernel/svc: Implement svcGetThreadList
Similarly like svcGetProcessList, this retrieves the list of threads
from the current process. In the kernel itself, a process instance
maintains a list of threads, which are used within this function.

Threads are registered to a process' thread list at thread
initialization, and unregistered from the list upon thread destruction
(if said thread has a non-null owning process).

We assert on the debug event case, as we currently don't implement
kernel debug objects.
2019-04-02 00:48:40 -04:00
ReinUsesLisp
592a24ae53 process: Fix up compilation 2019-04-02 01:44:32 -03:00
bunnei
29df6bbbd3
Merge pull request #2281 from lioncash/memory
kernel/codeset: Make CodeSet's memory data member a regular std::vector
2019-04-01 22:20:05 -04:00
Lioncash
20cc0b8d3c kernel/wait_object: Make ShouldWait() take thread members by pointer-to-const
Given this is intended as a querying function, it doesn't make sense to
allow the implementer to modify the state of the given thread.
2019-04-01 18:19:45 -04:00
Lioncash
3a846aa80f kernel/process: Report total physical memory used to svcGetInfo
Reports the (mostly) correct size through svcGetInfo now for queries to
total used physical memory. This still doesn't correctly handle memory
allocated via svcMapPhysicalMemory, however, we don't currently handle
that case anyways.
2019-03-28 22:59:20 -04:00
Lioncash
2289e895aa kernel/process: Store the total size of the code memory loaded
This will be necessary to properly report the used memory size in
svcGetInfo.
2019-03-28 22:51:17 -04:00
Lioncash
5d4ab5ec2f kernel/process: Store the main thread stack size to a data member
This will be necessary in order to properly report memory usage within
svcGetInfo.
2019-03-28 18:45:06 -04:00
Lioncash
427f1e3e3d kernel/process: Make Run's stack size parameter a u64
This will make operating with the process-related SVC commands much
nicer in the future (the parameter representing the stack size in
svcStartProcess is a 64-bit value).
2019-03-28 18:26:12 -04:00
Lioncash
2aca7b9e1e kernel/process: Ensure that given stack size is always page-aligned
The kernel always makes sure that the given stack size is aligned to
page boundaries.
2019-03-28 18:25:00 -04:00