input_common: Initial skeleton for custom joycon driver

This commit is contained in:
Narr the Reg 2022-12-20 11:34:33 -06:00
parent 475370c8f8
commit d80e6c399b
8 changed files with 1786 additions and 3 deletions

View file

@ -51,6 +51,8 @@ enum class PollingMode {
NFC, NFC,
// Enable infrared camera polling // Enable infrared camera polling
IR, IR,
// Enable ring controller polling
Ring,
}; };
enum class CameraFormat { enum class CameraFormat {
@ -67,6 +69,7 @@ enum class VibrationError {
None, None,
NotSupported, NotSupported,
Disabled, Disabled,
InvalidHandle,
Unknown, Unknown,
}; };
@ -74,6 +77,7 @@ enum class VibrationError {
enum class PollingError { enum class PollingError {
None, None,
NotSupported, NotSupported,
InvalidHandle,
Unknown, Unknown,
}; };
@ -190,6 +194,8 @@ struct TouchStatus {
struct BodyColorStatus { struct BodyColorStatus {
u32 body{}; u32 body{};
u32 buttons{}; u32 buttons{};
u32 left_grip{};
u32 right_grip{};
}; };
// HD rumble data // HD rumble data
@ -228,17 +234,31 @@ enum class ButtonNames {
Engine, Engine,
// This will display the button by value instead of the button name // This will display the button by value instead of the button name
Value, Value,
// Joycon button names
ButtonLeft, ButtonLeft,
ButtonRight, ButtonRight,
ButtonDown, ButtonDown,
ButtonUp, ButtonUp,
TriggerZ,
TriggerR,
TriggerL,
ButtonA, ButtonA,
ButtonB, ButtonB,
ButtonX, ButtonX,
ButtonY, ButtonY,
ButtonPlus,
ButtonMinus,
ButtonHome,
ButtonCapture,
ButtonStickL,
ButtonStickR,
TriggerL,
TriggerZL,
TriggerSL,
TriggerR,
TriggerZR,
TriggerSR,
// GC button names
TriggerZ,
ButtonStart, ButtonStart,
// DS4 button names // DS4 button names

View file

@ -51,8 +51,13 @@ endif()
if (ENABLE_SDL2) if (ENABLE_SDL2)
target_sources(input_common PRIVATE target_sources(input_common PRIVATE
drivers/joycon.cpp
drivers/joycon.h
drivers/sdl_driver.cpp drivers/sdl_driver.cpp
drivers/sdl_driver.h drivers/sdl_driver.h
helpers/joycon_driver.cpp
helpers/joycon_driver.h
helpers/joycon_protocol/joycon_types.h
) )
target_link_libraries(input_common PRIVATE SDL2::SDL2) target_link_libraries(input_common PRIVATE SDL2::SDL2)
target_compile_definitions(input_common PRIVATE HAVE_SDL2) target_compile_definitions(input_common PRIVATE HAVE_SDL2)

View file

@ -0,0 +1,615 @@
// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
// SPDX-License-Identifier: GPL-2.0-or-later
#include <fmt/format.h>
#include "common/param_package.h"
#include "common/settings.h"
#include "common/thread.h"
#include "input_common/drivers/joycon.h"
#include "input_common/helpers/joycon_driver.h"
#include "input_common/helpers/joycon_protocol/joycon_types.h"
namespace InputCommon {
Joycons::Joycons(const std::string& input_engine_) : InputEngine(input_engine_) {
LOG_INFO(Input, "Joycon driver Initialization started");
const int init_res = SDL_hid_init();
if (init_res == 0) {
Setup();
} else {
LOG_ERROR(Input, "Hidapi could not be initialized. failed with error = {}", init_res);
}
}
Joycons::~Joycons() {
Reset();
}
void Joycons::Reset() {
scan_thread = {};
for (const auto& device : left_joycons) {
if (!device) {
continue;
}
device->Stop();
}
for (const auto& device : right_joycons) {
if (!device) {
continue;
}
device->Stop();
}
for (const auto& device : pro_joycons) {
if (!device) {
continue;
}
device->Stop();
}
SDL_hid_exit();
}
void Joycons::Setup() {
u32 port = 0;
for (auto& device : left_joycons) {
PreSetController(GetIdentifier(port, Joycon::ControllerType::Left));
device = std::make_shared<Joycon::JoyconDriver>(port++);
}
for (auto& device : right_joycons) {
PreSetController(GetIdentifier(port, Joycon::ControllerType::Right));
device = std::make_shared<Joycon::JoyconDriver>(port++);
}
for (auto& device : pro_joycons) {
PreSetController(GetIdentifier(port, Joycon::ControllerType::Pro));
device = std::make_shared<Joycon::JoyconDriver>(port++);
}
if (!scan_thread_running) {
scan_thread = std::jthread([this](std::stop_token stop_token) { ScanThread(stop_token); });
}
}
void Joycons::ScanThread(std::stop_token stop_token) {
constexpr u16 nintendo_vendor_id = 0x057e;
Common::SetCurrentThreadName("yuzu:input:JoyconScanThread");
scan_thread_running = true;
while (!stop_token.stop_requested()) {
SDL_hid_device_info* devs = SDL_hid_enumerate(nintendo_vendor_id, 0x0);
SDL_hid_device_info* cur_dev = devs;
while (cur_dev) {
if (IsDeviceNew(cur_dev)) {
LOG_DEBUG(Input, "Device Found,type : {:04X} {:04X}", cur_dev->vendor_id,
cur_dev->product_id);
RegisterNewDevice(cur_dev);
}
cur_dev = cur_dev->next;
}
std::this_thread::sleep_for(std::chrono::seconds(5));
}
scan_thread_running = false;
}
bool Joycons::IsDeviceNew(SDL_hid_device_info* device_info) const {
Joycon::ControllerType type{};
Joycon::SerialNumber serial_number{};
const auto result = Joycon::JoyconDriver::GetDeviceType(device_info, type);
if (result != Joycon::DriverResult::Success) {
return false;
}
const auto result2 = Joycon::JoyconDriver::GetSerialNumber(device_info, serial_number);
if (result2 != Joycon::DriverResult::Success) {
return false;
}
auto is_handle_identical = [&](std::shared_ptr<Joycon::JoyconDriver> device) {
if (!device) {
return false;
}
if (!device->IsConnected()) {
return false;
}
if (device->GetHandleSerialNumber() != serial_number) {
return false;
}
return true;
};
// Check if device already exist
switch (type) {
case Joycon::ControllerType::Left:
for (const auto& device : left_joycons) {
if (is_handle_identical(device)) {
return false;
}
}
break;
case Joycon::ControllerType::Right:
for (const auto& device : right_joycons) {
if (is_handle_identical(device)) {
return false;
}
}
break;
case Joycon::ControllerType::Pro:
case Joycon::ControllerType::Grip:
for (const auto& device : pro_joycons) {
if (is_handle_identical(device)) {
return false;
}
}
break;
default:
return false;
}
return true;
}
void Joycons::RegisterNewDevice(SDL_hid_device_info* device_info) {
Joycon::ControllerType type{};
auto result = Joycon::JoyconDriver::GetDeviceType(device_info, type);
auto handle = GetNextFreeHandle(type);
if (handle == nullptr) {
LOG_WARNING(Input, "No free handles available");
return;
}
if (result == Joycon::DriverResult::Success) {
result = handle->RequestDeviceAccess(device_info);
}
if (result == Joycon::DriverResult::Success) {
LOG_WARNING(Input, "Initialize device");
std::function<void(Joycon::Battery)> on_battery_data;
std::function<void(Joycon::Color)> on_button_data;
std::function<void(int, f32)> on_stick_data;
std::function<void(int, std::array<u8, 6>)> on_motion_data;
std::function<void(s16)> on_ring_data;
std::function<void(const std::vector<u8>&)> on_amiibo_data;
const std::size_t port = handle->GetDevicePort();
handle->on_battery_data = {
[this, port, type](Joycon::Battery value) { OnBatteryUpdate(port, type, value); }};
handle->on_color_data = {
[this, port, type](Joycon::Color value) { OnColorUpdate(port, type, value); }};
handle->on_button_data = {
[this, port, type](int id, bool value) { OnButtonUpdate(port, type, id, value); }};
handle->on_stick_data = {
[this, port, type](int id, f32 value) { OnStickUpdate(port, type, id, value); }};
handle->on_motion_data = {[this, port, type](int id, Joycon::MotionData value) {
OnMotionUpdate(port, type, id, value);
}};
handle->on_ring_data = {[this](f32 ring_data) { OnRingConUpdate(ring_data); }};
handle->on_amiibo_data = {[this, port](const std::vector<u8>& amiibo_data) {
OnAmiiboUpdate(port, amiibo_data);
}};
handle->InitializeDevice();
}
}
std::shared_ptr<Joycon::JoyconDriver> Joycons::GetNextFreeHandle(
Joycon::ControllerType type) const {
if (type == Joycon::ControllerType::Left) {
for (const auto& device : left_joycons) {
if (!device->IsConnected()) {
return device;
}
}
}
if (type == Joycon::ControllerType::Right) {
for (const auto& device : right_joycons) {
if (!device->IsConnected()) {
return device;
}
}
}
if (type == Joycon::ControllerType::Pro || type == Joycon::ControllerType::Grip) {
for (const auto& device : pro_joycons) {
if (!device->IsConnected()) {
return device;
}
}
}
return nullptr;
}
bool Joycons::IsVibrationEnabled(const PadIdentifier& identifier) {
const auto handle = GetHandle(identifier);
if (handle == nullptr) {
return false;
}
return handle->IsVibrationEnabled();
}
Common::Input::VibrationError Joycons::SetVibration(
const PadIdentifier& identifier, const Common::Input::VibrationStatus& vibration) {
const Joycon::VibrationValue native_vibration{
.low_amplitude = vibration.low_amplitude,
.low_frequency = vibration.low_frequency,
.high_amplitude = vibration.high_amplitude,
.high_frequency = vibration.high_amplitude,
};
auto handle = GetHandle(identifier);
if (handle == nullptr) {
return Common::Input::VibrationError::InvalidHandle;
}
handle->SetVibration(native_vibration);
return Common::Input::VibrationError::None;
}
void Joycons::SetLeds(const PadIdentifier& identifier, const Common::Input::LedStatus& led_status) {
auto handle = GetHandle(identifier);
if (handle == nullptr) {
return;
}
int led_config = led_status.led_1 ? 1 : 0;
led_config += led_status.led_2 ? 2 : 0;
led_config += led_status.led_3 ? 4 : 0;
led_config += led_status.led_4 ? 8 : 0;
const auto result = handle->SetLedConfig(static_cast<u8>(led_config));
if (result != Joycon::DriverResult::Success) {
LOG_ERROR(Input, "Failed to set led config");
}
}
Common::Input::CameraError Joycons::SetCameraFormat(const PadIdentifier& identifier_,
Common::Input::CameraFormat camera_format) {
return Common::Input::CameraError::NotSupported;
};
Common::Input::NfcState Joycons::SupportsNfc(const PadIdentifier& identifier_) const {
return Common::Input::NfcState::Success;
};
Common::Input::NfcState Joycons::WriteNfcData(const PadIdentifier& identifier_,
const std::vector<u8>& data) {
return Common::Input::NfcState::NotSupported;
};
Common::Input::PollingError Joycons::SetPollingMode(const PadIdentifier& identifier,
const Common::Input::PollingMode polling_mode) {
auto handle = GetHandle(identifier);
if (handle == nullptr) {
LOG_ERROR(Input, "Invalid handle {}", identifier.port);
return Common::Input::PollingError::InvalidHandle;
}
switch (polling_mode) {
case Common::Input::PollingMode::NFC:
handle->SetNfcMode();
break;
case Common::Input::PollingMode::Active:
handle->SetActiveMode();
break;
case Common::Input::PollingMode::Pasive:
handle->SetPasiveMode();
break;
case Common::Input::PollingMode::Ring:
handle->SetRingConMode();
break;
default:
return Common::Input::PollingError::NotSupported;
}
return Common::Input::PollingError::None;
}
void Joycons::OnBatteryUpdate(std::size_t port, Joycon::ControllerType type,
Joycon::Battery value) {
const auto identifier = GetIdentifier(port, type);
if (value.charging != 0) {
SetBattery(identifier, Common::Input::BatteryLevel::Charging);
return;
}
Common::Input::BatteryLevel battery{value.status.Value()};
switch (value.status) {
case 0:
battery = Common::Input::BatteryLevel::Empty;
break;
case 1:
battery = Common::Input::BatteryLevel::Critical;
break;
case 2:
battery = Common::Input::BatteryLevel::Low;
break;
case 3:
battery = Common::Input::BatteryLevel::Medium;
break;
case 4:
default:
battery = Common::Input::BatteryLevel::Full;
break;
}
SetBattery(identifier, battery);
}
void Joycons::OnColorUpdate(std::size_t port, Joycon::ControllerType type,
const Joycon::Color& value) {}
void Joycons::OnButtonUpdate(std::size_t port, Joycon::ControllerType type, int id, bool value) {
const auto identifier = GetIdentifier(port, type);
SetButton(identifier, id, value);
}
void Joycons::OnStickUpdate(std::size_t port, Joycon::ControllerType type, int id, f32 value) {
const auto identifier = GetIdentifier(port, type);
SetAxis(identifier, id, value);
}
void Joycons::OnMotionUpdate(std::size_t port, Joycon::ControllerType type, int id,
const Joycon::MotionData& value) {
const auto identifier = GetIdentifier(port, type);
BasicMotion motion_data{
.gyro_x = value.gyro_x,
.gyro_y = value.gyro_y,
.gyro_z = value.gyro_z,
.accel_x = value.accel_x,
.accel_y = value.accel_y,
.accel_z = value.accel_z,
.delta_timestamp = 15000,
};
SetMotion(identifier, id, motion_data);
}
void Joycons::OnRingConUpdate(f32 ring_data) {
// To simplify ring detection it will always be mapped to an empty identifier for all
// controllers
constexpr PadIdentifier identifier = {
.guid = Common::UUID{},
.port = 0,
.pad = 0,
};
SetAxis(identifier, 100, ring_data);
}
void Joycons::OnAmiiboUpdate(std::size_t port, const std::vector<u8>& amiibo_data) {
const auto identifier = GetIdentifier(port, Joycon::ControllerType::Right);
SetNfc(identifier, {Common::Input::NfcState::NewAmiibo, amiibo_data});
}
std::shared_ptr<Joycon::JoyconDriver> Joycons::GetHandle(PadIdentifier identifier) const {
auto is_handle_active = [&](std::shared_ptr<Joycon::JoyconDriver> device) {
if (!device) {
return false;
}
if (!device->IsConnected()) {
return false;
}
if (device->GetDevicePort() == identifier.port) {
return true;
}
return false;
};
const auto type = static_cast<Joycon::ControllerType>(identifier.pad);
if (type == Joycon::ControllerType::Left) {
for (const auto& device : left_joycons) {
if (is_handle_active(device)) {
return device;
}
}
}
if (type == Joycon::ControllerType::Right) {
for (const auto& device : right_joycons) {
if (is_handle_active(device)) {
return device;
}
}
}
if (type == Joycon::ControllerType::Pro || type == Joycon::ControllerType::Grip) {
for (const auto& device : pro_joycons) {
if (is_handle_active(device)) {
return device;
}
}
}
return nullptr;
}
PadIdentifier Joycons::GetIdentifier(std::size_t port, Joycon::ControllerType type) const {
return {
.guid = Common::UUID{Common::InvalidUUID},
.port = port,
.pad = static_cast<std::size_t>(type),
};
}
std::vector<Common::ParamPackage> Joycons::GetInputDevices() const {
std::vector<Common::ParamPackage> devices{};
auto add_entry = [&](std::shared_ptr<Joycon::JoyconDriver> device) {
if (!device) {
return;
}
if (!device->IsConnected()) {
return;
}
std::string name = fmt::format("{} {}", JoyconName(device->GetHandleDeviceType()),
device->GetDevicePort());
devices.emplace_back(Common::ParamPackage{
{"engine", GetEngineName()},
{"display", std::move(name)},
{"port", std::to_string(device->GetDevicePort())},
{"pad", std::to_string(static_cast<std::size_t>(device->GetHandleDeviceType()))},
});
};
for (const auto& controller : left_joycons) {
add_entry(controller);
}
for (const auto& controller : right_joycons) {
add_entry(controller);
}
for (const auto& controller : pro_joycons) {
add_entry(controller);
}
return devices;
}
ButtonMapping Joycons::GetButtonMappingForDevice(const Common::ParamPackage& params) {
static constexpr std::array<std::pair<Settings::NativeButton::Values, Joycon::PadButton>, 20>
switch_to_joycon_button = {
std::pair{Settings::NativeButton::A, Joycon::PadButton::A},
{Settings::NativeButton::B, Joycon::PadButton::B},
{Settings::NativeButton::X, Joycon::PadButton::X},
{Settings::NativeButton::Y, Joycon::PadButton::Y},
{Settings::NativeButton::DLeft, Joycon::PadButton::Left},
{Settings::NativeButton::DUp, Joycon::PadButton::Up},
{Settings::NativeButton::DRight, Joycon::PadButton::Right},
{Settings::NativeButton::DDown, Joycon::PadButton::Down},
{Settings::NativeButton::SL, Joycon::PadButton::LeftSL},
{Settings::NativeButton::SR, Joycon::PadButton::LeftSR},
{Settings::NativeButton::L, Joycon::PadButton::L},
{Settings::NativeButton::R, Joycon::PadButton::R},
{Settings::NativeButton::ZL, Joycon::PadButton::ZL},
{Settings::NativeButton::ZR, Joycon::PadButton::ZR},
{Settings::NativeButton::Plus, Joycon::PadButton::Plus},
{Settings::NativeButton::Minus, Joycon::PadButton::Minus},
{Settings::NativeButton::Home, Joycon::PadButton::Home},
{Settings::NativeButton::Screenshot, Joycon::PadButton::Capture},
{Settings::NativeButton::LStick, Joycon::PadButton::StickL},
{Settings::NativeButton::RStick, Joycon::PadButton::StickR},
};
if (!params.Has("port")) {
return {};
}
ButtonMapping mapping{};
for (const auto& [switch_button, joycon_button] : switch_to_joycon_button) {
Common::ParamPackage button_params{};
button_params.Set("engine", GetEngineName());
button_params.Set("port", params.Get("port", 0));
button_params.Set("button", static_cast<int>(joycon_button));
mapping.insert_or_assign(switch_button, std::move(button_params));
}
return mapping;
}
AnalogMapping Joycons::GetAnalogMappingForDevice(const Common::ParamPackage& params) {
if (!params.Has("port")) {
return {};
}
AnalogMapping mapping = {};
Common::ParamPackage left_analog_params;
left_analog_params.Set("engine", GetEngineName());
left_analog_params.Set("port", params.Get("port", 0));
left_analog_params.Set("axis_x", static_cast<int>(Joycon::PadAxes::LeftStickX));
left_analog_params.Set("axis_y", static_cast<int>(Joycon::PadAxes::LeftStickY));
mapping.insert_or_assign(Settings::NativeAnalog::LStick, std::move(left_analog_params));
Common::ParamPackage right_analog_params;
right_analog_params.Set("engine", GetEngineName());
right_analog_params.Set("port", params.Get("port", 0));
right_analog_params.Set("axis_x", static_cast<int>(Joycon::PadAxes::RightStickX));
right_analog_params.Set("axis_y", static_cast<int>(Joycon::PadAxes::RightStickY));
mapping.insert_or_assign(Settings::NativeAnalog::RStick, std::move(right_analog_params));
return mapping;
}
MotionMapping Joycons::GetMotionMappingForDevice(const Common::ParamPackage& params) {
if (!params.Has("port")) {
return {};
}
MotionMapping mapping = {};
Common::ParamPackage left_motion_params;
left_motion_params.Set("engine", GetEngineName());
left_motion_params.Set("port", params.Get("port", 0));
left_motion_params.Set("motion", 0);
mapping.insert_or_assign(Settings::NativeMotion::MotionLeft, std::move(left_motion_params));
Common::ParamPackage right_Motion_params;
right_Motion_params.Set("engine", GetEngineName());
right_Motion_params.Set("port", params.Get("port", 0));
right_Motion_params.Set("motion", 1);
mapping.insert_or_assign(Settings::NativeMotion::MotionRight, std::move(right_Motion_params));
return mapping;
}
Common::Input::ButtonNames Joycons::GetUIButtonName(const Common::ParamPackage& params) const {
const auto button = static_cast<Joycon::PadButton>(params.Get("button", 0));
switch (button) {
case Joycon::PadButton::Left:
return Common::Input::ButtonNames::ButtonLeft;
case Joycon::PadButton::Right:
return Common::Input::ButtonNames::ButtonRight;
case Joycon::PadButton::Down:
return Common::Input::ButtonNames::ButtonDown;
case Joycon::PadButton::Up:
return Common::Input::ButtonNames::ButtonUp;
case Joycon::PadButton::LeftSL:
case Joycon::PadButton::RightSL:
return Common::Input::ButtonNames::TriggerSL;
case Joycon::PadButton::LeftSR:
case Joycon::PadButton::RightSR:
return Common::Input::ButtonNames::TriggerSR;
case Joycon::PadButton::L:
return Common::Input::ButtonNames::TriggerL;
case Joycon::PadButton::R:
return Common::Input::ButtonNames::TriggerR;
case Joycon::PadButton::ZL:
return Common::Input::ButtonNames::TriggerZL;
case Joycon::PadButton::ZR:
return Common::Input::ButtonNames::TriggerZR;
case Joycon::PadButton::A:
return Common::Input::ButtonNames::ButtonA;
case Joycon::PadButton::B:
return Common::Input::ButtonNames::ButtonB;
case Joycon::PadButton::X:
return Common::Input::ButtonNames::ButtonX;
case Joycon::PadButton::Y:
return Common::Input::ButtonNames::ButtonY;
case Joycon::PadButton::Plus:
return Common::Input::ButtonNames::ButtonPlus;
case Joycon::PadButton::Minus:
return Common::Input::ButtonNames::ButtonMinus;
case Joycon::PadButton::Home:
return Common::Input::ButtonNames::ButtonHome;
case Joycon::PadButton::Capture:
return Common::Input::ButtonNames::ButtonCapture;
case Joycon::PadButton::StickL:
return Common::Input::ButtonNames::ButtonStickL;
case Joycon::PadButton::StickR:
return Common::Input::ButtonNames::ButtonStickR;
default:
return Common::Input::ButtonNames::Undefined;
}
}
Common::Input::ButtonNames Joycons::GetUIName(const Common::ParamPackage& params) const {
if (params.Has("button")) {
return GetUIButtonName(params);
}
if (params.Has("axis")) {
return Common::Input::ButtonNames::Value;
}
if (params.Has("motion")) {
return Common::Input::ButtonNames::Engine;
}
return Common::Input::ButtonNames::Invalid;
}
std::string Joycons::JoyconName(Joycon::ControllerType type) const {
switch (type) {
case Joycon::ControllerType::Left:
return "Left Joycon";
case Joycon::ControllerType::Right:
return "Right Joycon";
case Joycon::ControllerType::Pro:
return "Pro Controller";
case Joycon::ControllerType::Grip:
return "Grip Controller";
default:
return "Unknow Joycon";
}
}
} // namespace InputCommon

View file

@ -0,0 +1,107 @@
// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include <array>
#include <span>
#include <thread>
#include <SDL_hidapi.h>
#include "input_common/input_engine.h"
namespace InputCommon::Joycon {
using SerialNumber = std::array<u8, 15>;
struct Battery;
struct Color;
struct MotionData;
enum class ControllerType;
enum class DriverResult;
class JoyconDriver;
} // namespace InputCommon::Joycon
namespace InputCommon {
class Joycons final : public InputCommon::InputEngine {
public:
explicit Joycons(const std::string& input_engine_);
~Joycons();
bool IsVibrationEnabled(const PadIdentifier& identifier) override;
Common::Input::VibrationError SetVibration(
const PadIdentifier& identifier, const Common::Input::VibrationStatus& vibration) override;
void SetLeds(const PadIdentifier& identifier,
const Common::Input::LedStatus& led_status) override;
Common::Input::CameraError SetCameraFormat(const PadIdentifier& identifier_,
Common::Input::CameraFormat camera_format) override;
Common::Input::NfcState SupportsNfc(const PadIdentifier& identifier_) const override;
Common::Input::NfcState WriteNfcData(const PadIdentifier& identifier_,
const std::vector<u8>& data) override;
Common::Input::PollingError SetPollingMode(
const PadIdentifier& identifier, const Common::Input::PollingMode polling_mode) override;
/// Used for automapping features
std::vector<Common::ParamPackage> GetInputDevices() const override;
ButtonMapping GetButtonMappingForDevice(const Common::ParamPackage& params) override;
AnalogMapping GetAnalogMappingForDevice(const Common::ParamPackage& params) override;
MotionMapping GetMotionMappingForDevice(const Common::ParamPackage& params) override;
Common::Input::ButtonNames GetUIName(const Common::ParamPackage& params) const override;
private:
static constexpr std::size_t MaxSupportedControllers = 8;
/// For shutting down, clear all data, join all threads, release usb devices
void Reset();
/// Registers controllers, clears all data and starts the scan thread
void Setup();
/// Actively searchs for new devices
void ScanThread(std::stop_token stop_token);
/// Returns true if device is valid and not registered
bool IsDeviceNew(SDL_hid_device_info* device_info) const;
/// Tries to connect to the new device
void RegisterNewDevice(SDL_hid_device_info* device_info);
/// Returns the next free handle
std::shared_ptr<Joycon::JoyconDriver> GetNextFreeHandle(Joycon::ControllerType type) const;
void OnBatteryUpdate(std::size_t port, Joycon::ControllerType type, Joycon::Battery value);
void OnColorUpdate(std::size_t port, Joycon::ControllerType type, const Joycon::Color& value);
void OnButtonUpdate(std::size_t port, Joycon::ControllerType type, int id, bool value);
void OnStickUpdate(std::size_t port, Joycon::ControllerType type, int id, f32 value);
void OnMotionUpdate(std::size_t port, Joycon::ControllerType type, int id,
const Joycon::MotionData& value);
void OnRingConUpdate(f32 ring_data);
void OnAmiiboUpdate(std::size_t port, const std::vector<u8>& amiibo_data);
/// Returns a JoyconHandle corresponding to a PadIdentifier
std::shared_ptr<Joycon::JoyconDriver> GetHandle(PadIdentifier identifier) const;
/// Returns a PadIdentifier corresponding to the port number
PadIdentifier GetIdentifier(std::size_t port, Joycon::ControllerType type) const;
std::string JoyconName(std::size_t port) const;
Common::Input::ButtonNames GetUIButtonName(const Common::ParamPackage& params) const;
/// Returns the name of the device in text format
std::string JoyconName(Joycon::ControllerType type) const;
std::jthread scan_thread;
bool scan_thread_running{};
// Joycon types are split by type to ease supporting dualjoycon configurations
std::array<std::shared_ptr<Joycon::JoyconDriver>, MaxSupportedControllers> left_joycons{};
std::array<std::shared_ptr<Joycon::JoyconDriver>, MaxSupportedControllers> right_joycons{};
std::array<std::shared_ptr<Joycon::JoyconDriver>, MaxSupportedControllers> pro_joycons{};
};
} // namespace InputCommon

View file

@ -0,0 +1,382 @@
// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
// SPDX-License-Identifier: GPL-2.0-or-later
#include "common/logging/log.h"
#include "common/swap.h"
#include "common/thread.h"
#include "input_common/helpers/joycon_driver.h"
namespace InputCommon::Joycon {
JoyconDriver::JoyconDriver(std::size_t port_) : port{port_} {
hidapi_handle = std::make_shared<JoyconHandle>();
}
JoyconDriver::~JoyconDriver() {
Stop();
}
void JoyconDriver::Stop() {
is_connected = false;
input_thread = {};
}
DriverResult JoyconDriver::RequestDeviceAccess(SDL_hid_device_info* device_info) {
std::scoped_lock lock{mutex};
handle_device_type = ControllerType::None;
GetDeviceType(device_info, handle_device_type);
if (handle_device_type == ControllerType::None) {
return DriverResult::UnsupportedControllerType;
}
hidapi_handle->handle =
SDL_hid_open(device_info->vendor_id, device_info->product_id, device_info->serial_number);
std::memcpy(&handle_serial_number, device_info->serial_number, 15);
if (!hidapi_handle->handle) {
LOG_ERROR(Input, "Yuzu can't gain access to this device: ID {:04X}:{:04X}.",
device_info->vendor_id, device_info->product_id);
return DriverResult::HandleInUse;
}
SDL_hid_set_nonblocking(hidapi_handle->handle, 1);
return DriverResult::Success;
}
DriverResult JoyconDriver::InitializeDevice() {
if (!hidapi_handle->handle) {
return DriverResult::InvalidHandle;
}
std::scoped_lock lock{mutex};
disable_input_thread = true;
// Reset Counters
error_counter = 0;
hidapi_handle->packet_counter = 0;
// Set HW default configuration
vibration_enabled = true;
motion_enabled = true;
hidbus_enabled = false;
nfc_enabled = false;
passive_enabled = false;
gyro_sensitivity = Joycon::GyroSensitivity::DPS2000;
gyro_performance = Joycon::GyroPerformance::HZ833;
accelerometer_sensitivity = Joycon::AccelerometerSensitivity::G8;
accelerometer_performance = Joycon::AccelerometerPerformance::HZ100;
// Initialize HW Protocols
// Get fixed joycon info
supported_features = GetSupportedFeatures();
// Get Calibration data
// Set led status
// Apply HW configuration
SetPollingMode();
// Start pooling for data
is_connected = true;
if (!input_thread_running) {
input_thread =
std::jthread([this](std::stop_token stop_token) { InputThread(stop_token); });
}
disable_input_thread = false;
return DriverResult::Success;
}
void JoyconDriver::InputThread(std::stop_token stop_token) {
LOG_INFO(Input, "JC Adapter input thread started");
Common::SetCurrentThreadName("JoyconInput");
input_thread_running = true;
// Max update rate is 5ms, ensure we are always able to read a bit faster
constexpr int ThreadDelay = 2;
std::vector<u8> buffer(MaxBufferSize);
while (!stop_token.stop_requested()) {
int status = 0;
if (!IsInputThreadValid()) {
input_thread.request_stop();
continue;
}
// By disabling the input thread we can ensure custom commands will succeed as no package is
// skipped
if (!disable_input_thread) {
status = SDL_hid_read_timeout(hidapi_handle->handle, buffer.data(), buffer.size(),
ThreadDelay);
} else {
std::this_thread::sleep_for(std::chrono::milliseconds(ThreadDelay));
}
if (IsPayloadCorrect(status, buffer)) {
OnNewData(buffer);
}
std::this_thread::yield();
}
is_connected = false;
input_thread_running = false;
LOG_INFO(Input, "JC Adapter input thread stopped");
}
void JoyconDriver::OnNewData(std::span<u8> buffer) {
const auto report_mode = static_cast<InputReport>(buffer[0]);
switch (report_mode) {
case InputReport::STANDARD_FULL_60HZ:
ReadActiveMode(buffer);
break;
case InputReport::NFC_IR_MODE_60HZ:
ReadNfcIRMode(buffer);
break;
case InputReport::SIMPLE_HID_MODE:
ReadPassiveMode(buffer);
break;
default:
LOG_ERROR(Input, "Report mode not Implemented {}", report_mode);
break;
}
}
void JoyconDriver::SetPollingMode() {
disable_input_thread = true;
disable_input_thread = false;
}
JoyconDriver::SupportedFeatures JoyconDriver::GetSupportedFeatures() {
SupportedFeatures features{
.passive = true,
.motion = true,
.vibration = true,
};
if (device_type == ControllerType::Right) {
features.nfc = true;
features.irs = true;
features.hidbus = true;
}
if (device_type == ControllerType::Pro) {
features.nfc = true;
}
return features;
}
void JoyconDriver::ReadActiveMode(std::span<u8> buffer) {
InputReportActive data{};
memcpy(&data, buffer.data(), sizeof(InputReportActive));
// Packages can be a litte bit inconsistent. Average the delta time to provide a smoother motion
// experience
const auto now = std::chrono::steady_clock::now();
const auto new_delta_time =
std::chrono::duration_cast<std::chrono::microseconds>(now - last_update).count();
delta_time = static_cast<u64>((delta_time * 0.8f) + (new_delta_time * 0.2));
last_update = now;
switch (device_type) {
case Joycon::ControllerType::Left:
break;
case Joycon::ControllerType::Right:
break;
case Joycon::ControllerType::Pro:
break;
case Joycon::ControllerType::Grip:
case Joycon::ControllerType::Dual:
case Joycon::ControllerType::None:
break;
}
on_battery_data(data.battery_status);
on_color_data(color);
}
void JoyconDriver::ReadPassiveMode(std::span<u8> buffer) {
InputReportPassive data{};
memcpy(&data, buffer.data(), sizeof(InputReportPassive));
switch (device_type) {
case Joycon::ControllerType::Left:
break;
case Joycon::ControllerType::Right:
break;
case Joycon::ControllerType::Pro:
break;
case Joycon::ControllerType::Grip:
case Joycon::ControllerType::Dual:
case Joycon::ControllerType::None:
break;
}
}
void JoyconDriver::ReadNfcIRMode(std::span<u8> buffer) {
// This mode is compatible with the active mode
ReadActiveMode(buffer);
if (!nfc_enabled) {
return;
}
}
bool JoyconDriver::IsInputThreadValid() const {
if (!is_connected) {
return false;
}
if (hidapi_handle->handle == nullptr) {
return false;
}
// Controller is not responding. Terminate connection
if (error_counter > MaxErrorCount) {
return false;
}
return true;
}
bool JoyconDriver::IsPayloadCorrect(int status, std::span<const u8> buffer) {
if (status <= -1) {
error_counter++;
return false;
}
// There's no new data
if (status == 0) {
return false;
}
// No reply ever starts with zero
if (buffer[0] == 0x00) {
error_counter++;
return false;
}
error_counter = 0;
return true;
}
DriverResult JoyconDriver::SetVibration(const VibrationValue& vibration) {
std::scoped_lock lock{mutex};
return DriverResult::NotSupported;
}
DriverResult JoyconDriver::SetLedConfig(u8 led_pattern) {
std::scoped_lock lock{mutex};
return DriverResult::NotSupported;
}
DriverResult JoyconDriver::SetPasiveMode() {
motion_enabled = false;
hidbus_enabled = false;
nfc_enabled = false;
passive_enabled = true;
SetPollingMode();
return DriverResult::Success;
}
DriverResult JoyconDriver::SetActiveMode() {
motion_enabled = false;
hidbus_enabled = false;
nfc_enabled = false;
passive_enabled = false;
SetPollingMode();
return DriverResult::Success;
}
DriverResult JoyconDriver::SetNfcMode() {
motion_enabled = false;
hidbus_enabled = false;
nfc_enabled = true;
passive_enabled = false;
SetPollingMode();
return DriverResult::Success;
}
DriverResult JoyconDriver::SetRingConMode() {
motion_enabled = true;
hidbus_enabled = true;
nfc_enabled = false;
passive_enabled = false;
SetPollingMode();
return DriverResult::Success;
}
bool JoyconDriver::IsConnected() const {
std::scoped_lock lock{mutex};
return is_connected;
}
bool JoyconDriver::IsVibrationEnabled() const {
std::scoped_lock lock{mutex};
return vibration_enabled;
}
FirmwareVersion JoyconDriver::GetDeviceVersion() const {
std::scoped_lock lock{mutex};
return version;
}
Color JoyconDriver::GetDeviceColor() const {
std::scoped_lock lock{mutex};
return color;
}
std::size_t JoyconDriver::GetDevicePort() const {
std::scoped_lock lock{mutex};
return port;
}
ControllerType JoyconDriver::GetDeviceType() const {
std::scoped_lock lock{mutex};
return handle_device_type;
}
ControllerType JoyconDriver::GetHandleDeviceType() const {
std::scoped_lock lock{mutex};
return handle_device_type;
}
SerialNumber JoyconDriver::GetSerialNumber() const {
std::scoped_lock lock{mutex};
return serial_number;
}
SerialNumber JoyconDriver::GetHandleSerialNumber() const {
std::scoped_lock lock{mutex};
return handle_serial_number;
}
Joycon::DriverResult JoyconDriver::GetDeviceType(SDL_hid_device_info* device_info,
ControllerType& controller_type) {
std::array<std::pair<u32, Joycon::ControllerType>, 4> supported_devices{
std::pair<u32, Joycon::ControllerType>{0x2006, Joycon::ControllerType::Left},
{0x2007, Joycon::ControllerType::Right},
{0x2009, Joycon::ControllerType::Pro},
{0x200E, Joycon::ControllerType::Grip},
};
constexpr u16 nintendo_vendor_id = 0x057e;
controller_type = Joycon::ControllerType::None;
if (device_info->vendor_id != nintendo_vendor_id) {
return Joycon::DriverResult::UnsupportedControllerType;
}
for (const auto& [product_id, type] : supported_devices) {
if (device_info->product_id == static_cast<u16>(product_id)) {
controller_type = type;
return Joycon::DriverResult::Success;
}
}
return Joycon::DriverResult::UnsupportedControllerType;
}
Joycon::DriverResult JoyconDriver::GetSerialNumber(SDL_hid_device_info* device_info,
Joycon::SerialNumber& serial_number) {
if (device_info->serial_number == nullptr) {
return Joycon::DriverResult::Unknown;
}
std::memcpy(&serial_number, device_info->serial_number, 15);
return Joycon::DriverResult::Success;
}
} // namespace InputCommon::Joycon

View file

@ -0,0 +1,146 @@
// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
// SPDX-License-Identifier: GPL-2.0-or-later
#pragma once
#include <functional>
#include <mutex>
#include <span>
#include <thread>
#include "input_common/helpers/joycon_protocol/joycon_types.h"
namespace InputCommon::Joycon {
class JoyconDriver final {
public:
explicit JoyconDriver(std::size_t port_);
~JoyconDriver();
DriverResult RequestDeviceAccess(SDL_hid_device_info* device_info);
DriverResult InitializeDevice();
void Stop();
bool IsConnected() const;
bool IsVibrationEnabled() const;
FirmwareVersion GetDeviceVersion() const;
Color GetDeviceColor() const;
std::size_t GetDevicePort() const;
ControllerType GetDeviceType() const;
ControllerType GetHandleDeviceType() const;
SerialNumber GetSerialNumber() const;
SerialNumber GetHandleSerialNumber() const;
DriverResult SetVibration(const VibrationValue& vibration);
DriverResult SetLedConfig(u8 led_pattern);
DriverResult SetPasiveMode();
DriverResult SetActiveMode();
DriverResult SetNfcMode();
DriverResult SetRingConMode();
// Returns device type from hidapi handle
static Joycon::DriverResult GetDeviceType(SDL_hid_device_info* device_info,
Joycon::ControllerType& controller_type);
// Returns serial number from hidapi handle
static Joycon::DriverResult GetSerialNumber(SDL_hid_device_info* device_info,
Joycon::SerialNumber& serial_number);
std::function<void(Battery)> on_battery_data;
std::function<void(Color)> on_color_data;
std::function<void(int, bool)> on_button_data;
std::function<void(int, f32)> on_stick_data;
std::function<void(int, MotionData)> on_motion_data;
std::function<void(f32)> on_ring_data;
std::function<void(const std::vector<u8>&)> on_amiibo_data;
private:
struct SupportedFeatures {
bool passive{};
bool hidbus{};
bool irs{};
bool motion{};
bool nfc{};
bool vibration{};
};
/// Main thread, actively request new data from the handle
void InputThread(std::stop_token stop_token);
/// Called everytime a valid package arrives
void OnNewData(std::span<u8> buffer);
/// Updates device configuration to enable or disable features
void SetPollingMode();
/// Returns true if input thread is valid and doesn't need to be stopped
bool IsInputThreadValid() const;
/// Returns true if the data should be interpreted. Otherwise the error counter is incremented
bool IsPayloadCorrect(int status, std::span<const u8> buffer);
/// Returns a list of supported features that can be enabled on this device
SupportedFeatures GetSupportedFeatures();
/// Handles data from passive packages
void ReadPassiveMode(std::span<u8> buffer);
/// Handles data from active packages
void ReadActiveMode(std::span<u8> buffer);
/// Handles data from nfc or ir packages
void ReadNfcIRMode(std::span<u8> buffer);
// Protocol Features
// Connection status
bool is_connected{};
u64 delta_time;
std::size_t error_counter{};
std::shared_ptr<JoyconHandle> hidapi_handle = nullptr;
std::chrono::time_point<std::chrono::steady_clock> last_update;
// External device status
bool starlink_connected{};
bool ring_connected{};
bool amiibo_detected{};
// Harware configuration
u8 leds{};
ReportMode mode{};
bool passive_enabled{}; // Low power mode, Ideal for multiple controllers at the same time
bool hidbus_enabled{}; // External device support
bool irs_enabled{}; // Infrared camera input
bool motion_enabled{}; // Enables motion input
bool nfc_enabled{}; // Enables Amiibo detection
bool vibration_enabled{}; // Allows vibrations
// Calibration data
GyroSensitivity gyro_sensitivity{};
GyroPerformance gyro_performance{};
AccelerometerSensitivity accelerometer_sensitivity{};
AccelerometerPerformance accelerometer_performance{};
JoyStickCalibration left_stick_calibration{};
JoyStickCalibration right_stick_calibration{};
MotionCalibration motion_calibration{};
// Fixed joycon info
FirmwareVersion version{};
Color color{};
std::size_t port{};
ControllerType device_type{}; // Device type reported by controller
ControllerType handle_device_type{}; // Device type reported by hidapi
SerialNumber serial_number{}; // Serial number reported by controller
SerialNumber handle_serial_number{}; // Serial number type reported by hidapi
SupportedFeatures supported_features{};
// Thread related
mutable std::mutex mutex;
std::jthread input_thread;
bool input_thread_running{};
bool disable_input_thread{};
};
} // namespace InputCommon::Joycon

View file

@ -0,0 +1,494 @@
// SPDX-FileCopyrightText: Copyright 2022 yuzu Emulator Project
// SPDX-License-Identifier: GPL-2.0-or-later
// Based on dkms-hid-nintendo implementation, CTCaer joycon toolkit and dekuNukem reverse
// engineering https://github.com/nicman23/dkms-hid-nintendo/blob/master/src/hid-nintendo.c
// https://github.com/CTCaer/jc_toolkit
// https://github.com/dekuNukem/Nintendo_Switch_Reverse_Engineering
#pragma once
#include <array>
#include <functional>
#include <SDL_hidapi.h>
#include "common/bit_field.h"
#include "common/common_funcs.h"
#include "common/common_types.h"
namespace InputCommon::Joycon {
constexpr u32 MaxErrorCount = 50;
constexpr u32 MaxBufferSize = 60;
constexpr u32 MaxResponseSize = 49;
constexpr u32 MaxSubCommandResponseSize = 64;
constexpr std::array<u8, 8> DefaultVibrationBuffer{0x0, 0x1, 0x40, 0x40, 0x0, 0x1, 0x40, 0x40};
using MacAddress = std::array<u8, 6>;
using SerialNumber = std::array<u8, 15>;
enum class ControllerType {
None,
Left,
Right,
Pro,
Grip,
Dual,
};
enum class PadAxes {
LeftStickX,
LeftStickY,
RightStickX,
RightStickY,
Undefined,
};
enum class PadMotion {
LeftMotion,
RightMotion,
Undefined,
};
enum class PadButton : u32 {
Down = 0x000001,
Up = 0x000002,
Right = 0x000004,
Left = 0x000008,
LeftSR = 0x000010,
LeftSL = 0x000020,
L = 0x000040,
ZL = 0x000080,
Y = 0x000100,
X = 0x000200,
B = 0x000400,
A = 0x000800,
RightSR = 0x001000,
RightSL = 0x002000,
R = 0x004000,
ZR = 0x008000,
Minus = 0x010000,
Plus = 0x020000,
StickR = 0x040000,
StickL = 0x080000,
Home = 0x100000,
Capture = 0x200000,
};
enum class PasivePadButton : u32 {
Down_A = 0x0001,
Right_X = 0x0002,
Left_B = 0x0004,
Up_Y = 0x0008,
SL = 0x0010,
SR = 0x0020,
Minus = 0x0100,
Plus = 0x0200,
StickL = 0x0400,
StickR = 0x0800,
Home = 0x1000,
Capture = 0x2000,
L_R = 0x4000,
ZL_ZR = 0x8000,
};
enum class OutputReport : u8 {
RUMBLE_AND_SUBCMD = 0x01,
FW_UPDATE_PKT = 0x03,
RUMBLE_ONLY = 0x10,
MCU_DATA = 0x11,
USB_CMD = 0x80,
};
enum class InputReport : u8 {
SUBCMD_REPLY = 0x21,
STANDARD_FULL_60HZ = 0x30,
NFC_IR_MODE_60HZ = 0x31,
SIMPLE_HID_MODE = 0x3F,
INPUT_USB_RESPONSE = 0x81,
};
enum class FeatureReport : u8 {
Last_SUBCMD = 0x02,
OTA_GW_UPGRADE = 0x70,
SETUP_MEM_READ = 0x71,
MEM_READ = 0x72,
ERASE_MEM_SECTOR = 0x73,
MEM_WRITE = 0x74,
LAUNCH = 0x75,
};
enum class SubCommand : u8 {
STATE = 0x00,
MANUAL_BT_PAIRING = 0x01,
REQ_DEV_INFO = 0x02,
SET_REPORT_MODE = 0x03,
TRIGGERS_ELAPSED = 0x04,
GET_PAGE_LIST_STATE = 0x05,
SET_HCI_STATE = 0x06,
RESET_PAIRING_INFO = 0x07,
LOW_POWER_MODE = 0x08,
SPI_FLASH_READ = 0x10,
SPI_FLASH_WRITE = 0x11,
RESET_MCU = 0x20,
SET_MCU_CONFIG = 0x21,
SET_MCU_STATE = 0x22,
SET_PLAYER_LIGHTS = 0x30,
GET_PLAYER_LIGHTS = 0x31,
SET_HOME_LIGHT = 0x38,
ENABLE_IMU = 0x40,
SET_IMU_SENSITIVITY = 0x41,
WRITE_IMU_REG = 0x42,
READ_IMU_REG = 0x43,
ENABLE_VIBRATION = 0x48,
GET_REGULATED_VOLTAGE = 0x50,
SET_EXTERNAL_CONFIG = 0x58,
UNKNOWN_RINGCON = 0x59,
UNKNOWN_RINGCON2 = 0x5A,
UNKNOWN_RINGCON3 = 0x5C,
};
enum class UsbSubCommand : u8 {
CONN_STATUS = 0x01,
HADSHAKE = 0x02,
BAUDRATE_3M = 0x03,
NO_TIMEOUT = 0x04,
EN_TIMEOUT = 0x05,
RESET = 0x06,
PRE_HANDSHAKE = 0x91,
SEND_UART = 0x92,
};
enum class CalMagic : u8 {
USR_MAGIC_0 = 0xB2,
USR_MAGIC_1 = 0xA1,
USRR_MAGI_SIZE = 2,
};
enum class CalAddr {
SERIAL_NUMBER = 0X6000,
DEVICE_TYPE = 0X6012,
COLOR_EXIST = 0X601B,
FACT_LEFT_DATA = 0X603d,
FACT_RIGHT_DATA = 0X6046,
COLOR_DATA = 0X6050,
FACT_IMU_DATA = 0X6020,
USER_LEFT_MAGIC = 0X8010,
USER_LEFT_DATA = 0X8012,
USER_RIGHT_MAGIC = 0X801B,
USER_RIGHT_DATA = 0X801D,
USER_IMU_MAGIC = 0X8026,
USER_IMU_DATA = 0X8028,
};
enum class ReportMode : u8 {
ACTIVE_POLLING_NFC_IR_CAMERA_DATA = 0x00,
ACTIVE_POLLING_NFC_IR_CAMERA_CONFIGURATION = 0x01,
ACTIVE_POLLING_NFC_IR_CAMERA_DATA_CONFIGURATION = 0x02,
ACTIVE_POLLING_IR_CAMERA_DATA = 0x03,
MCU_UPDATE_STATE = 0x23,
STANDARD_FULL_60HZ = 0x30,
NFC_IR_MODE_60HZ = 0x31,
SIMPLE_HID_MODE = 0x3F,
};
enum class GyroSensitivity : u8 {
DPS250,
DPS500,
DPS1000,
DPS2000, // Default
};
enum class AccelerometerSensitivity : u8 {
G8, // Default
G4,
G2,
G16,
};
enum class GyroPerformance : u8 {
HZ833,
HZ208, // Default
};
enum class AccelerometerPerformance : u8 {
HZ200,
HZ100, // Default
};
enum class MCUCommand : u8 {
ConfigureMCU = 0x21,
ConfigureIR = 0x23,
};
enum class MCUSubCommand : u8 {
SetMCUMode = 0x0,
SetDeviceMode = 0x1,
ReadDeviceMode = 0x02,
WriteDeviceRegisters = 0x4,
};
enum class MCUMode : u8 {
Suspend = 0,
Standby = 1,
Ringcon = 3,
NFC = 4,
IR = 5,
MaybeFWUpdate = 6,
};
enum class MCURequest : u8 {
GetMCUStatus = 1,
GetNFCData = 2,
GetIRData = 3,
};
enum class MCUReport : u8 {
Empty = 0x00,
StateReport = 0x01,
IRData = 0x03,
BusyInitializing = 0x0b,
IRStatus = 0x13,
IRRegisters = 0x1b,
NFCState = 0x2a,
NFCReadData = 0x3a,
EmptyAwaitingCmd = 0xff,
};
enum class MCUPacketFlag : u8 {
MorePacketsRemaining = 0x00,
LastCommandPacket = 0x08,
};
enum class NFCReadCommand : u8 {
CancelAll = 0x00,
StartPolling = 0x01,
StopPolling = 0x02,
StartWaitingRecieve = 0x04,
Ntag = 0x06,
Mifare = 0x0F,
};
enum class NFCTagType : u8 {
AllTags = 0x00,
Ntag215 = 0x01,
};
enum class DriverResult {
Success,
WrongReply,
Timeout,
UnsupportedControllerType,
HandleInUse,
ErrorReadingData,
ErrorWritingData,
NoDeviceDetected,
InvalidHandle,
NotSupported,
Unknown,
};
struct MotionSensorCalibration {
s16 offset;
s16 scale;
};
struct MotionCalibration {
std::array<MotionSensorCalibration, 3> accelerometer;
std::array<MotionSensorCalibration, 3> gyro;
};
// Basic motion data containing data from the sensors and a timestamp in microseconds
struct MotionData {
float gyro_x{};
float gyro_y{};
float gyro_z{};
float accel_x{};
float accel_y{};
float accel_z{};
u64 delta_timestamp{};
};
struct JoyStickAxisCalibration {
u16 max{1};
u16 min{1};
u16 center{0};
};
struct JoyStickCalibration {
JoyStickAxisCalibration x;
JoyStickAxisCalibration y;
};
struct RingCalibration {
s16 default_value;
s16 max_value;
s16 min_value;
};
struct Color {
u32 body;
u32 buttons;
u32 left_grip;
u32 right_grip;
};
struct Battery {
union {
u8 raw{};
BitField<0, 4, u8> unknown;
BitField<4, 1, u8> charging;
BitField<5, 3, u8> status;
};
};
struct VibrationValue {
f32 low_amplitude;
f32 low_frequency;
f32 high_amplitude;
f32 high_frequency;
};
struct JoyconHandle {
SDL_hid_device* handle = nullptr;
u8 packet_counter{};
};
struct MCUConfig {
MCUCommand command;
MCUSubCommand sub_command;
MCUMode mode;
INSERT_PADDING_BYTES(0x22);
u8 crc;
};
static_assert(sizeof(MCUConfig) == 0x26, "MCUConfig is an invalid size");
#pragma pack(push, 1)
struct InputReportPassive {
InputReport report_mode;
u16 button_input;
u8 stick_state;
std::array<u8, 10> unknown_data;
};
static_assert(sizeof(InputReportPassive) == 0xE, "InputReportPassive is an invalid size");
struct InputReportActive {
InputReport report_mode;
u8 packet_id;
Battery battery_status;
std::array<u8, 3> button_input;
std::array<u8, 3> left_stick_state;
std::array<u8, 3> right_stick_state;
u8 vibration_code;
std::array<s16, 6 * 2> motion_input;
INSERT_PADDING_BYTES(0x2);
s16 ring_input;
};
static_assert(sizeof(InputReportActive) == 0x29, "InputReportActive is an invalid size");
struct InputReportNfcIr {
InputReport report_mode;
u8 packet_id;
Battery battery_status;
std::array<u8, 3> button_input;
std::array<u8, 3> left_stick_state;
std::array<u8, 3> right_stick_state;
u8 vibration_code;
std::array<s16, 6 * 2> motion_input;
INSERT_PADDING_BYTES(0x4);
};
static_assert(sizeof(InputReportNfcIr) == 0x29, "InputReportNfcIr is an invalid size");
#pragma pack(pop)
struct IMUCalibration {
std::array<s16, 3> accelerometer_offset;
std::array<s16, 3> accelerometer_scale;
std::array<s16, 3> gyroscope_offset;
std::array<s16, 3> gyroscope_scale;
};
static_assert(sizeof(IMUCalibration) == 0x18, "IMUCalibration is an invalid size");
struct NFCReadBlock {
u8 start;
u8 end;
};
static_assert(sizeof(NFCReadBlock) == 0x2, "NFCReadBlock is an invalid size");
struct NFCReadBlockCommand {
u8 block_count{};
std::array<NFCReadBlock, 4> blocks{};
};
static_assert(sizeof(NFCReadBlockCommand) == 0x9, "NFCReadBlockCommand is an invalid size");
struct NFCReadCommandData {
u8 unknown;
u8 uuid_length;
u8 unknown_2;
std::array<u8, 6> uid;
NFCTagType tag_type;
NFCReadBlockCommand read_block;
};
static_assert(sizeof(NFCReadCommandData) == 0x13, "NFCReadCommandData is an invalid size");
struct NFCPollingCommandData {
u8 enable_mifare;
u8 unknown_1;
u8 unknown_2;
u8 unknown_3;
u8 unknown_4;
};
static_assert(sizeof(NFCPollingCommandData) == 0x05, "NFCPollingCommandData is an invalid size");
struct NFCRequestState {
MCUSubCommand sub_command;
NFCReadCommand command_argument;
u8 packet_id;
INSERT_PADDING_BYTES(0x1);
MCUPacketFlag packet_flag;
u8 data_length;
union {
std::array<u8, 0x1F> raw_data;
NFCReadCommandData nfc_read;
NFCPollingCommandData nfc_polling;
};
u8 crc;
};
static_assert(sizeof(NFCRequestState) == 0x26, "NFCRequestState is an invalid size");
struct FirmwareVersion {
u8 major;
u8 minor;
};
static_assert(sizeof(FirmwareVersion) == 0x2, "FirmwareVersion is an invalid size");
struct DeviceInfo {
FirmwareVersion firmware;
MacAddress mac_address;
};
static_assert(sizeof(DeviceInfo) == 0x8, "DeviceInfo is an invalid size");
struct MotionStatus {
bool is_enabled;
u64 delta_time;
GyroSensitivity gyro_sensitivity;
AccelerometerSensitivity accelerometer_sensitivity;
};
struct RingStatus {
bool is_enabled;
s16 default_value;
s16 max_value;
s16 min_value;
};
struct JoyconCallbacks {
std::function<void(Battery)> on_battery_data;
std::function<void(Color)> on_color_data;
std::function<void(int, bool)> on_button_data;
std::function<void(int, f32)> on_stick_data;
std::function<void(int, const MotionData&)> on_motion_data;
std::function<void(f32)> on_ring_data;
std::function<void(const std::vector<u8>&)> on_amiibo_data;
};
} // namespace InputCommon::Joycon

View file

@ -23,6 +23,7 @@
#include "input_common/drivers/gc_adapter.h" #include "input_common/drivers/gc_adapter.h"
#endif #endif
#ifdef HAVE_SDL2 #ifdef HAVE_SDL2
#include "input_common/drivers/joycon.h"
#include "input_common/drivers/sdl_driver.h" #include "input_common/drivers/sdl_driver.h"
#endif #endif
@ -81,6 +82,7 @@ struct InputSubsystem::Impl {
RegisterEngine("virtual_gamepad", virtual_gamepad); RegisterEngine("virtual_gamepad", virtual_gamepad);
#ifdef HAVE_SDL2 #ifdef HAVE_SDL2
RegisterEngine("sdl", sdl); RegisterEngine("sdl", sdl);
RegisterEngine("joycon", joycon);
#endif #endif
Common::Input::RegisterInputFactory("touch_from_button", Common::Input::RegisterInputFactory("touch_from_button",
@ -111,6 +113,7 @@ struct InputSubsystem::Impl {
UnregisterEngine(virtual_gamepad); UnregisterEngine(virtual_gamepad);
#ifdef HAVE_SDL2 #ifdef HAVE_SDL2
UnregisterEngine(sdl); UnregisterEngine(sdl);
UnregisterEngine(joycon);
#endif #endif
Common::Input::UnregisterInputFactory("touch_from_button"); Common::Input::UnregisterInputFactory("touch_from_button");
@ -133,6 +136,8 @@ struct InputSubsystem::Impl {
auto udp_devices = udp_client->GetInputDevices(); auto udp_devices = udp_client->GetInputDevices();
devices.insert(devices.end(), udp_devices.begin(), udp_devices.end()); devices.insert(devices.end(), udp_devices.begin(), udp_devices.end());
#ifdef HAVE_SDL2 #ifdef HAVE_SDL2
auto joycon_devices = joycon->GetInputDevices();
devices.insert(devices.end(), joycon_devices.begin(), joycon_devices.end());
auto sdl_devices = sdl->GetInputDevices(); auto sdl_devices = sdl->GetInputDevices();
devices.insert(devices.end(), sdl_devices.begin(), sdl_devices.end()); devices.insert(devices.end(), sdl_devices.begin(), sdl_devices.end());
#endif #endif
@ -164,6 +169,9 @@ struct InputSubsystem::Impl {
if (engine == sdl->GetEngineName()) { if (engine == sdl->GetEngineName()) {
return sdl; return sdl;
} }
if (engine == joycon->GetEngineName()) {
return joycon;
}
#endif #endif
return nullptr; return nullptr;
} }
@ -247,6 +255,9 @@ struct InputSubsystem::Impl {
if (engine == sdl->GetEngineName()) { if (engine == sdl->GetEngineName()) {
return true; return true;
} }
if (engine == joycon->GetEngineName()) {
return true;
}
#endif #endif
return false; return false;
} }
@ -260,6 +271,7 @@ struct InputSubsystem::Impl {
udp_client->BeginConfiguration(); udp_client->BeginConfiguration();
#ifdef HAVE_SDL2 #ifdef HAVE_SDL2
sdl->BeginConfiguration(); sdl->BeginConfiguration();
joycon->BeginConfiguration();
#endif #endif
} }
@ -272,6 +284,7 @@ struct InputSubsystem::Impl {
udp_client->EndConfiguration(); udp_client->EndConfiguration();
#ifdef HAVE_SDL2 #ifdef HAVE_SDL2
sdl->EndConfiguration(); sdl->EndConfiguration();
joycon->EndConfiguration();
#endif #endif
} }
@ -304,6 +317,7 @@ struct InputSubsystem::Impl {
#ifdef HAVE_SDL2 #ifdef HAVE_SDL2
std::shared_ptr<SDLDriver> sdl; std::shared_ptr<SDLDriver> sdl;
std::shared_ptr<Joycons> joycon;
#endif #endif
}; };