Commit graph

16 commits

Author SHA1 Message Date
ameerj
9dfbc9bdce general: Rename "Frame Limit" references to "Speed Limit"
This setting is best referred to as a speed limit, as it involves the limits of all timing based aspects of the emulator, not only framerate.
This allows us to differentiate it from the fps unlocker setting.
2021-07-23 22:10:01 -04:00
lat9nq
c17e1bd7a8 yuzu qt: Use lambda and std::function for reset callback
Also makes use of std::move, and performs a clang-format cleanup.

This addresses review comments.

Co-authored-by: LC <mathew1800@gmail.com>
2021-06-01 17:22:06 -04:00
lat9nq
4a3d57e469 yuzu: Add settings reset button to general configuration
Builds on german77's work to reset all settings back to their defaults.
This include UISettings and Settings values structs, but does not affect
save profiles, input profiles, and game directories.

This works from a button input in configure_general. When activated, it
calls a callback to close the whole configure dialog, then GMainWindow
deletes the old configuration, both on disk and in memory, and
reinitalizes a new one. It also resets a portion of the UI and calls the
telemetry window prompt.
2021-06-01 17:22:04 -04:00
fearlessTobi
8aeb425669 configuration: Initial work to reset all settings
This commit does not compile.

Initial work to add and connect a Reset to Defaults button to the
configure_general tab.

Co-authored-by: german77 <juangerman-13@hotmail.com>
2021-06-01 17:09:33 -04:00
lat9nq
3ef4769f31 configuration: Use forward declares and remove extraneous structs 2020-07-19 13:26:55 -04:00
lat9nq
0d462f5608 configuration_shared: Break up tracker structs to respective classes
One less global variable.
2020-07-19 13:26:55 -04:00
lat9nq
63d23835ef
configuration: implement per-game configurations (#4098)
* Switch game settings to use a pointer

In order to add full per-game settings, we need to be able to tell yuzu to switch
to using either the global or game configuration. Using a pointer makes it easier
to switch.

* configuration: add new UI without changing existing funcitonality

The new UI also adds General, System, Graphics, Advanced Graphics,
and Audio tabs, but as yet they do nothing. This commit keeps yuzu
to the same functionality as originally branched.

* configuration: Rename files

These weren't included in the last commit. Now they are.

* configuration: setup global configuration checkbox

Global config checkbox now enables/disables the appropriate tabs in the game
properties dialog. The use global configuration setting is now saved to the
config, defaulting to true. This also addresses some changes requested in the PR.

* configuration: swap to per-game config memory for properties dialog

Does not set memory going in-game. Swaps to game values when opening the
properties dialog, then swaps back when closing it. Uses a `memcpy` to swap.
Also implements saving config files, limited to certain groups of configurations
so as to not risk setting unsafe configurations.

* configuration: change config interfaces to use config-specific pointers

When a game is booted, we need to be able to open the configuration dialogs
without changing the settings pointer in the game's emualtion. A new pointer
specific to just the configuration dialogs can be used to separate changes
to just those config dialogs without affecting the emulation.

* configuration: boot a game using per-game settings

Swaps values where needed to boot a game.

* configuration: user correct config during emulation

Creates a new pointer specifically for modifying the configuration while
emulation is in progress. Both the regular configuration dialog and the game
properties dialog now use the pointer Settings::config_values to focus edits to
the correct struct.

* settings: split Settings::values into two different structs

By splitting the settings into two mutually exclusive structs, it becomes easier,
as a developer, to determine how to use the Settings structs after per-game
configurations is merged. Other benefits include only duplicating the required
settings in memory.

* settings: move use_docked_mode to Controls group

`use_docked_mode` is set in the input settings and cannot be accessed from the
system settings. Grouping it with system settings causes it to be saved with
per-game settings, which may make transferring configs more difficult later on,
especially since docked mode cannot be set from within the game properties
dialog.

* configuration: Fix the other yuzu executables and a regression

In main.cpp, we have to get the title ID before the ROM is loaded, else the
renderer will reflect only the global settings and now the user's game specific
settings.

* settings: use a template to duplicate memory for each setting

Replaces the type of each variable in the Settings::Values struct with a new
class that allows basic data reading and writing. The new struct
Settings::Setting duplicates the data in memory and can manage global overrides
per each setting.

* configuration: correct add-ons config and swap settings when apropriate

Any add-ons interaction happens directly through the global values struct.
Swapping bewteen structs now also includes copying the necessary global configs
that cannot be changed nor saved in per-game settings. General and System config
menus now update based on whether it is viewing the global or per-game settings.

* settings: restore old values struct

No longer needed with the Settings::Setting class template.

* configuration: implement hierarchical game properties dialog

This sets the apropriate global or local data in each setting.

* clang format

* clang format take 2

can the docker container save this?

* address comments and style issues

* config: read and write settings with global awareness

Adds new functions to read and write settings while keeping the global state in
focus. Files now generated per-game are much smaller since often they only need
address the global state.

* settings: restore global state when necessary

Upon closing a game or the game properties dialog, we need to restore all global
settings to the original global state so that we can properly open the
configuration dialog or boot a different game.

* configuration: guard setting values incorrectly

This disables setting values while a game is running if the setting is
overwritten by a per game setting.

* config: don't write local settings in the global config

Simple guards to prevent writing the wrong settings in the wrong files.

* configuration: add comments, assume less, and clang format

No longer assumes that a disabled UI element means the global state is turned
off, instead opting to directly answer that question. Still however assumes a
game is running if it is in that state.

* configuration: fix a logic error

Should not be negated

* restore settings' global state regardless of accept/cancel

Fixes loading a properties dialog and causing the global config dialog to show
local settings.

* fix more logic errors

Fixed the frame limit would set the global setting from the game properties
dialog. Also strengthened the Settings::Setting member variables and simplified
the logic in config reading (ReadSettingGlobal).

* fix another logic error

In my efforts to guard RestoreGlobalState, I accidentally negated the IsPowered
condition.

* configure_audio: set toggle_stretched_audio to tristate

* fixed custom rtc and rng seed overwriting the global value

* clang format

* rebased

* clang format take 4

* address my own review

Basically revert unintended changes

* settings: literal instead of casting

"No need to cast, use 1U instead"
Thanks, Morph!

Co-authored-by: Morph <39850852+Morph1984@users.noreply.github.com>

* Revert "settings: literal instead of casting
"

This reverts commit 95e992a87c898f3e882ffdb415bb0ef9f80f613f.

* main: fix status buttons reporting wrong settings after stop emulation

* settings: Log UseDockedMode in the Controls group

This should have happened when use_docked_mode was moved over to the controls group
internally. This just reflects this in the log.

* main: load settings if the file has a title id

In other words, don't exit if the loader has trouble getting a title id.

* use a zero

* settings: initalize resolution factor with constructor instead of casting

* Revert "settings: initalize resolution factor with constructor instead of casting"

This reverts commit 54c35ecb46a29953842614620f9b7de1aa9d5dc8.

* configure_graphics: guard device selector when Vulkan is global

Prevents the user from editing the device selector if Vulkan is the global
renderer backend. Also resets the vulkan_device variable when the users
switches back-and-forth between global and Vulkan.

* address reviewer concerns

Changes function variables to const wherever they don't need to be changed. Sets Settings::Setting to final as it should not be inherited from. Sets ConfigurationShared::use_global_text to static.

Co-Authored-By: VolcaEM <volcaem@users.noreply.github.com>

* main: load per-game settings after LoadROM

This prevents `Restart Emulation` from restoring the global settings *after* the per-game settings were applied. Thanks to BSoDGamingYT for finding this bug.

* Revert "main: load per-game settings after LoadROM"

This reverts commit 9d0d48c52d2dcf3bfb1806cc8fa7d5a271a8a804.

* main: only restore global settings when necessary

Loading the per-game settings cannot happen after the ROM is loaded, so we have to specify when to restore the global state. Again thanks to BSoD for finding the bug.

* configuration_shared: address reviewer concerns except operator overrides

Dropping operator override usage in next commit.

Co-Authored-By: LC <lioncash@users.noreply.github.com>

* settings: Drop operator overrides from Setting template

Requires using GetValue and SetValue explicitly. Also reverts a change that broke title ID formatting in the game properties dialog.

* complete rebase

* configuration_shared: translate "Use global configuration"

Uses ConfigurePerGame to do so, since its usage, at least as of now, corresponds with ConfigurationShared.

* configure_per_game: address reviewer concern

As far as I understand, it prevents the program from unnecessarily copying strings.

Co-Authored-By: LC <lioncash@users.noreply.github.com>

Co-authored-by: Morph <39850852+Morph1984@users.noreply.github.com>
Co-authored-by: VolcaEM <volcaem@users.noreply.github.com>
Co-authored-by: LC <lioncash@users.noreply.github.com>
2020-07-09 22:42:09 -04:00
Lioncash
c09ff382a4 yuzu/configuration: Make all widgets and dialogs aware of language changes
To prepare for translation support, this makes all of the widgets
cognizant of the language change event that occurs whenever
installTranslator() is called and automatically retranslates their text
where necessary.

This is important as calling the backing UI's retranslateUi() is often
not enough, particularly in cases where we add our own strings that
aren't controlled by it. In that case we need to manually refresh the
strings ourselves.
2019-06-05 21:57:21 -04:00
Lioncash
e1d755bdda yuzu/configuration: Make function naming consistent 2019-06-05 15:40:33 -04:00
Adityarup Laha
57a4a2ae0f yuzu: Make hotkeys configurable via the GUI
* Adds a new Hotkeys tab in the Controls group.
* Double-click a Hotkey to rebind it.
2019-03-16 03:55:57 +01:00
Lioncash
eabfb7730d yuzu/configuration: Add missing override specifiers to configuration-related classes
Resolves trivial compiler warnings.
2018-12-02 14:18:36 -05:00
Zach Hilman
e58c951a59 configure_input: Make None a controller option instead of checkbox 2018-11-18 23:22:36 -05:00
David Marcec
40db288a2a Renamed CheckIfOperationChanged to OnDockedModeChanged 2018-11-08 12:12:00 +11:00
David Marcec
fd1ef25257 Fixups 2018-11-07 20:12:27 +11:00
Lioncash
c8f6754417 qt/hotkey: Get rid of global hotkey map instance
Instead, we make a proper registry class and house it within the main
window, then pass it to whatever needs access to the loaded hotkeys.

This way, we avoid a global variable, and don't need to initialize a
std::map instance before the program can do anything.
2018-08-07 02:28:17 -04:00
James Rowe
ebf9a784a9 Massive removal of unused modules 2018-01-12 19:11:03 -07:00
Renamed from src/citra_qt/configuration/configure_general.h (Browse further)