GoToSocial offers Mastodon-style privacy settings for posts. In order from most to least private, these are:
* Direct
* Mutuals-only
* Private/Followers-only
* Unlisted
* Public
Whatever privacy setting you choose for a post, GoToSocial will do the best it can to ensure that your posts don't appear to users on instances that you've blocked, or to users that you've blocked directly.
Unlike with some other fediverse server implementations, GoToSocial uses a default post setting of `unlisted` rather than `public` for new accounts. Our philosophy here is that posting something public should always be a conscious decision rather than a default.
Please note that while GoToSocial respects these privacy settings very strictly, other server implementations cannot necessarily be trusted to do so: there are bad actors on the fediverse. As with any social media, you should think carefully about what you post and to whom.
### Direct
Posts with a visibility of `direct` will only appear to the post author, and to users who are mentioned in the post. Take the following post for example:
```text
Hey @whoever@example.org, this is a private/direct post! Only we can see this!
```
If this message was written by `@someone@server.com` then only `@whoever@example.org` and `@someone@server.com` would be able to see it.
As the name implies, `direct` posts are best used when you want to communicate directly with one or more people.
However, `direct` posts are **not** a suitable replacement for end-to-end encrypted messaging offered by things like [Signal](https://signal.org/) and [Matrix](https://matrix.org/). If you want to communicate directly, but you're not communicating sensitive information, then direct posts are fine. If you need to have a sensitive + secure conversation, use something else!
Direct posts can be liked/faved, but they cannot be boosted.
Direct posts are **not** accessible via a web URL on your GoToSocial instance.
### Mutuals-only
Posts with a visibility of `mutuals_only` will only appear to the post author, and to *mutual follows* of the post author. In other words, they can only be seen by others if two conditions are met:
1. The other account follows the post author.
2. The post author follows the other account back.
This is useful for when you want to post something that you only want friends to see.
Mutuals-only posts can be liked/faved, but they cannot be boosted.
Mutuals-only posts are **not** accessible via a web URL on your GoToSocial instance.
### Private/Followers-only
Posts with a visibility of `private` will only be visible to the post author, and to people who follow the post author. This is similar to `mutuals_only`, but only the first condition needs to met; the post author doesn't need to follow the other account back.
This is useful for when you want to make announcements to people who follow you, or share something slightly less private than `mutuals_only`.
Private/followers-only posts can be liked/faved, but they cannot be boosted.
Private/followers-only posts are **not** accessible via a web URL on your GoToSocial instance.
### Unlisted
Posts with a visibility of `unlisted` (sometimes called `unlocked` posts) are semi-public. They will be sent to anyone who follows you, and they can be boosted into the timelines of people who don't follow you, but they won't appear on Federated or Local timelines, and they won't appear on your public profile.
Unlisted posts are useful when you want to allow a post to spread, but you don't want it to be immediately visible to everyone. They are also useful when you want to make public-ish posts, but without clogging up Federated/Local timelines.
Unlisted posts can be liked/faved, and they can be boosted.
Unlike with Mastodon, unlisted posts are **not** accessible via a web URL on your GoToSocial instance!
### Public
Posts with a visibility of `public` are *fully* public. That is, they can be seen via the web, and they will appear in Local and Federated timelines, and they are fully boostable. `public` is the ultimate 'let my post be seen everywhere' setting, for when you want something to be widely available and easy to distribute.
Public posts can be liked/faved, and they can be boosted.
**Public posts are accessible via a web URL on your GoToSocial instance!**
## Extra Flags
GoToSocial offers four extra flags on posts, which can be used to tweak how your post can be interacted with by others. These are:
*`federated`
*`boostable`
*`replyable`
*`likeable`
By default, all these flags are set to `true`.
Please note that while GoToSocial strictly respects these settings, other fediverse server implementations might not be aware of them. A consequence of this is that users on non-GoToSocial servers might think they are replying/boosting/liking your post, and their instance might behave as though that behavior was allowed, but those interactions will be denied by your GoToSocial server and you won't see them.
### Federated
When set to `false`, this post will not be federated out to other fediverse servers, and will be viewable only to accounts on your GoToSocial instance. This is sometimes called 'local-only' posting.
### Boostable
When set to `false`, your post will not be boostable, even if it is unlisted or public. GoToSocial enforces this by refusing dereferencing requests from remote servers in the event that someone tries to boost the post.
### Replyable
When set to `false`, replies to your post will not be accepted by your GoToSocial server, and will not appear in your timeline or create notifications. GoToSocial enforces this by giving an error message to attempted replies to the post from federated servers.
### Likeable
When set to `false`, likes/faves of your post will not be accepted by your GoToSocial server, and will not create notifications. GoToSocial enforces this by giving an error message to attempted likes/faves on the post from federated servers.
GoToSocial currently accepts two different types of input for posts (and user bio). The [user settings page](./settings.md) allows you to select between them. These are:
Plain is the default method of posting: GtS accepts some plain looking text, and converts it into some nice HTML by parsing links and mentions etc. If you're used to Mastodon or Twitter or most other social media platforms, this way of writing posts will be immediately familiar.
Markdown is a more complex way of organizing text, which gives you more control over how your text is parsed and formatted.
GoToSocial supports the [Basic Markdown Syntax](https://www.markdownguide.org/basic-syntax), and some of the [Extended Markdown Syntax](https://www.markdownguide.org/extended-syntax/) as well, including fenced code blocks, footnotes, strikethrough, subscript, superscript, and automated URL linking.
You can also include snippets of basic HTML in your markdown!
For more information on Markdown, see [The Markdown Guide](https://www.markdownguide.org/).
For a quick reference on Markdown syntax, see the [Markdown Cheat Sheet](https://www.markdownguide.org/cheat-sheet).
When a post is submitted in `plain` format, GoToSocial automatically does some tidying up and formatting of the post in order to convert it to HTML, as described below.
### Whitespace
Any leading or trailing whitespaces and newlines are removed from the post. So for example:
```text
this post starts with some newlines
```
will become:
```text
this post starts with some newlines
```
### Wrapping
The whole post will be wrapped in `<p></p>`.
So the following text:
```text
Hi here's a little post!
```
Will become:
```html
<p>Hi here's a little post!</p>
```
### Linebreaks
Any newlines will be replaced with `<br />`
So to continue the above example:
```text
Hi here's a little post!
And here's another line.
```
Will become:
```html
<p>Hi here's a little post!<br/><br/>And here's another line</p>
```
### Links
Any recognizable links in the text will be shortened and turned into proper hyperlinks, and have some additional attributes added to them.
For example:
```text
Here's a link to something: https://example.org/some/link/address
```
will become:
```html
Here's a link to something: <ahref="https://example.org/some/link/address"rel="nofollow"rel="noreferrer"rel="noopener">example.org/some/link/address</a>
```
which will be rendered as:
> Here's a link to something: [example.org/some/link/address](https://example.org/some/link/address)
Note that this will only work for `http` and `https` links; other schemes are not supported.
### Mentions
You can 'mention' another account by referring to the account in the following way:
> @some_account@example.org
In this example, `some_account` is the username of the account you want to mention, and `example.org` is the domain that hosts their account.
The mentioned account will get a notification that you've mentioned them, and be able to see the post in which they were mentioned.
Mentions are formatted in a similar way to links, so:
```text
hi @some_account@example.org how's it going?
```
will become:
```html
hi <spanclass="h-card"><ahref="https://example.org/@some_account"class="u-url mention">@<span>some_account</span></a></span> how's it going?
```
which will be rendered as:
> hi <span class="h-card"><a href="https://example.org/@some_account" class="u-url mention">@<span>some_account</span></a></span> how's it going?
When mentioning local accounts (ie., accounts on your instance), the second part of the mention is not necessary. If there's an account with username `local_account_person` on your instance, you can mention them just by writing:
```text
hey @local_account_person you're my neighbour
```
This will become:
```html
hey <spanclass="h-card"><ahref="https://my.instance.org/@local_account_person"class="u-url mention">@<span>local_account_person</span></a></span> you're my neighbour
```
which will be rendered as:
> hey <span class="h-card"><a href="https://my.instance.org/@local_account_person" class="u-url mention">@<span>local_account_person</span></a></span> you're my neighbour
You can use one or more hashtags in your post to indicate subject matter, and to allow the post to be grouped together with other posts using the same hashtag in order to aid discoverability of your posts.
Most ActivityPub server implementations like Mastodon and similar only group together **Public** posts by the hashtags they use, but there is no guarantee about that. Generally speaking then, it is better to only use hashtags for Public visibility posts where you want the post to be able to spread more widely than it would otherwise. A good example of this is the `#introduction` hashtag, which tends to be used by new accounts who want to introduce themselves to the fediverse!
Including hashtags in your post works like most other social media software: just add a `#` symbol before the word you want to use as a hashtag.
Some examples:
*`#introduction`
*`#Mosstodon`
*`#LichenSubscribe`
Hashtags in GoToSocial are case-insensitive, so it doesn't matter if you use uppercase, lowercase, or a mixture of both when writing your hashtag, it will still count as the same hashtag. For example, `#Introduction` and `#introduction` are treated exactly the same.
For accessibility reasons, it is considerate to use upper camel case when you're writing hashtags. In other words: capitalize the first letter of every word in the hashtag. So rather than writing `#thisisahashtag`, which is difficult to read visually, and difficult for screenreaders to read out loud, consider writing `#ThisIsAHashtag` instead.
You can include as many hashtags as you like within a GoToSocial post, and each hashtag has a length limit of 100 characters.
